930 Small Wheel Loader

Weights

Operating Weight

31124 lb

Operating Weight - High Lift

31633 lb

Buckets

Bucket Capacities

1.9-5.0 m3 (2.5-6.5 yd3)

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 LEVEL II

Tires

Standard Size

20.5 R25, radial (L-3)

Other Choices Include

20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Transmission

Forward and Reverse - Range 1*

1-13 km/h (0.6-8 mph)

Forward and Reverse - Range 2

8 mile/h

Forward and Reverse - Range 3

17 mile/h

Forward and Reverse - Range 4

25 mile/h

Note

*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Loader Hydraulic System

Maximum Flow - Implement Pump

50 gal/min

Maximum Flow - Implement Pump - 4th Function Maximum Flow*

42 gal/min

Maximum Working Pressure - Implement Pump

3771 psi

Relief Pressure - Tilt Cylinder

4061 psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure

3771 psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure

4061 psi

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

5.1 s

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

2.7 s

Hydraulic Cycle Time - Total Cycle Time

9.3 s

Note

*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Service Refill Capacities

Engine Crankcase

5.3 gal (US)

Transmission - Gear Box

2.2 gal (US)

Front Axles

6.9 gal (US)

Hydraulic Tank

23.8 gal (US)

Rear Axles

6.6 gal (US)

Hydraulic System - Including Tank

43.6 gal (US)

Diesel Exhaust Fluid (DEF) Tank

5 gal (US)

Note

DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.

Cooling System

7.9 gal (US)

Fuel Tank

51.5 gal (US)

Sound

Note (1)

European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.

Steering

Maximum Flow - Steering Pump

34 gal/min

Maximum Working Pressure - Steering Pump

3500 psi

Engine

Bore

4 in

Stroke

5 in

Displacement

427 in²

Note (1)

Advertised power is tested per the specified standard in effect at the time of manufacture

Note (2)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components

Maximum Gross Torque - SAE J1995

608 ft·lbf

Maximum Gross Torque - ISO 14396

601 ft·lbf

Note (3)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Engine Model

Cat C7.1*

Note

*Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a

Axles

Front

Fixed; Locking differential (standard)

Rear

Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)

Shipping

UPC

Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.